TL;DR.E toru ngā taahiraa o te whakatau i te rahi o te rūma parai puna. Ka maherehia e te Hipanga 1 te akomanga o te waka ki te whānuitanga rahi o te rūma (9×6 ki te 30×30). Ka whakatauritehia e te Hipanga 2 te whiu (44mm ki te 76mm) ki te haere S-cam. Ka manatokohia e te Hipanga 3 te kaha me te urupare ki ngā raraunga OE me te ECE R13-H. Ka tirotirohia e tēnei tuhinga ia taahiraa me ngā tauira rūma tohutoro mai i teShaoxing Fangjie putumōhio ruuma wahia— T9 HF, T12/6200, T18/24, T20, T30/30DD me T30/30DDS — hei raka i te rūma matau mai i te 9×6 ki te 30×30.
He aha te Rahi o te Rūma Pēki he Whakatau, ehara i te Tau o te Putumōhio
Ko te tohu tau-rua i runga i te rūma parai puna — 9×6, 12×12, 16×16, 20×20, 24×24, 24×30, 30×24, 30×30 — e pā ana ki te horahanga o te diaphragm whai hua i roto i ngā inihi tapawhā mō te taha ratonga me te taha puna. Ko te tau tuatahi ko te horahanga taha ratonga; ko te tuarua ko te horahanga taha puna. Ko te tau whiu, e inehia ana i roto i ngā mirimita, he tawhā motuhake me ōrite ki te haere S-cam i te toki.
Ko te hapa e puta anō ana i roto i te hoko waka ko te whiriwhiri i te rūma mā te nama nui rawa atu o te rārangi ingoa. Ehara i te mea ko te rūma 30×30 te kōwhiringa pai rawa atu — koinei te kōwhiringa tika mō ngā toki taraiwa tarakihana taumaha me te kaha kume nui me te haere nui o te S-cam. Ko te rūma kotahi i runga i te toki muri o te wakatō māmā ka puta ai ngā raruraru mara e toru: te puhoi o te wā urupare, te kaha pana-tokotoko nui rawa atu, me te tukunga koretake o te pēki-tū. Me ōrite te rūma ki te toki, kaua ki te rārangi ingoa.
Ko te Shaoxing Fangjierārangi rūma paraiE whitu ngā huinga rahi-me-whiu e whakamahia whānuitia ana i roto i te hanga i ēnei rā, me te miro tauranga, te miro pūtu, te roa o te tokotoko pana me te roa whānui kua whakaputaina mō ia tauira. Ko te rerenga taahiraa-toru i raro nei e whakamahi ana i te ono o aua tauira hei huinga tohutoro:T9 HF, T12/6200, T18/24, T20, T30/30DDmeT30/30DDSKa hipokina ngātahitia e rāua te mahere katoa o ngā whiu 9×6 ki te 30×30 mō ngā taraka, ngā wakatō me ngā pahi.
Te Tukanga Maukati Rūma Pēki 3-Hipanga
Ko te rere i raro nei ko te rere kotahi e whakamahia ana e ngā kaihangarau pūnaha parai OE ina tohua he rūma mō tētahi kaupapa waka hou. Ka whakawhāitihia e te Hipanga 1 te whānuitanga rahi ki te rua, ki te toru rānei ngā kaitono i runga i te toki. Ka whakaitihia e te Hipanga 2 aua kaitono ki te kotahi mā te whakataurite i te whiu ki te haere ā-mīhini. Ka manatokohia e te Hipanga 3 ka tukuna e te rūma kua whiriwhiria te kaha piri me te wā urupare e hiahiatia ana e te pūnaha parai.
Te Rere 3-Hipanga: Mai i te Akomanga Waka ki te Rūma Maukati
Hipanga 1 — Tāutuhia te Akomanga o tō Waka me te Tūnga o tō Toki
He rapu te taahiraa 1, ehara i te tatau. He whānuitanga rahi rūma noa iho tō ia tūranga toki kua whakaritea puta noa i te umanga.
| Akomanga Waka | Tūnga o te toki | Awhe Rahi o te Rūma | Tauira Tohutoro |
|---|---|---|---|
| He wakatō māmā (tōka kotahi, iti iho i te 6 tāne) | Toki o muri | 9×6 | T9 HF |
| Taraka waenga, pahi (6 ki te 12 tāne) | Toki o mua | 12×12 / 16×16 | T12/6200 |
| Tarakihana taumaha-waenga (12 ki te 20 tāne) | Toki mua, toki tohu | 20×20 / 24×24 | T20 |
| Tarakihana taumaha (20 ki te 40 tāne) | Toki taraiwa | 24×30 / 30×30 | T30/30DD |
| Tarakihana taumaha (momo whiu-roa) | Toki taraiwa me ngā pēki kōpae | 30×30 (whiu roa) | T30/30DDS |
Hipanga 2 — Tauritehia te Tau Whiu ki te Āhua o tō Pūnaha Pēki
Ko te taahiraa 2 te wāhi e raka ai te tau o te putumōhio. Mā te roa o te whiu ka whakatau mēnā ka taea e te rūma te tae atu ki te pūwāhi tono katoa o te parai i te toki.
| Tauira Rūma | Rahi | Whiu | Te Roa o te Rākau Pana | Miro Tauranga |
|---|---|---|---|---|
| T9 HF | 9×6 | 44mm | 123 / 113 / 93mm | 2-M16x1.5 |
| T12/6200 | 12×12 | 48mm | 117 / 124mm | M16x1.5 |
| T18/24 | 18×24 | 64mm | 15.5mm | 2-3/8 inihi NPT |
| T20 | 20×20 | 57mm | 200 ki te 260mm | M16x1.5 / M22x1.5 / 3/8 inihi NPT |
| T30/30DD | 30×30 | 64mm | 100 / 115 / 125mm | 3/8 inihi NPT |
| T30/30DDS | 30×30 | 64mm / 76mm | 330 / 285 / 340mm | M16x1.5 / 3/8 inihi NPT |
Ko te ture tohutoro: me rite te roa o te whiu rūma ki te roa e hiahiatia ana e te pērai i te toki. Mō ngā toki taraiwa me ngā pērai pahu me te āhua S-cam, ko te whiu 64mm te paerewa. Mō ngā toki taraiwa me ngā pērai kōpae, kei te piki haere te maha o te whiu 76mm. E rua ngā momo whiu e tukuna ana e te T30/30DDS. Ka puta te kōwhiringa miro tauranga i te wā kotahi me te kōwhiringa whiu: ka whakamahia e ngā taraka Pākehā ngā tauranga ine M16x1.5, M22x1.5 rānei; ka whakamahia e ngā taraka o Amerika Te Raki te 3/8 inihi NPT.
Hipanga 3 — Manatokohia te Putanga Kaha me te Wā Urupare i te Whiu Maukati
Ko te taahiraa 3 te taahiraa manatoko, ā, koinei te mea e tino pekehia ana. Ka tuhia e te rārangi ingoa te rūma parai, ehara i te mahi a te pūnaha parai. Ko teFMCSAmeUNECEwhakaputa i ngā raraunga pūnaha parai tohutoro ka taea e ngā kaihoko te whakahua.
E toru ngā tawhā ka tirohia i te Hipanga 3:
- Putanga kaha whakapūmaui te 6.5 pae. E rua pea te kaha kume e whakaputaina ana e te rūma 30×30 i tō te rūma 9×6 i te pēhanga kotahi.
- Te wā whiu o te tokotoko panaKo ngā paearu ahumahi mō te wā urupare e whakaaetia ana i te pēhanga tuku 6.5 pae kei waenga i te 0.3 me te 0.5 hēkona.
- Te pēhanga tukunga taha-puna(te tikanga 4.5 ki te 5.5 pae) — ki te kore te taha puna e tuku katoatia ka noho te pēki tūnga e mau ana.
Me ahu mai ngā raraunga manatoko i te pūrongo whakamātautau kua whakaputaina e te kaihanga.He aratohu hanganga rūma pēke puna a Shaoxing Fangjiee kapi ana i ngā mātāpono miihini kei muri i te kaha me ngā tataunga urupare. Mō ngā waka mākete Pākehā,UNECE ECE R13-Hko te ture here e tohu ana i te iti rawa o te whai huatanga o te aukati me te matapihi wā urupare.
He aha ngā mea ka puta ina hē te mahere whiu?
Ina hē te whakatau i te mahere whiu, ka puta te hapa i te mara, ehara i te awheawhe. E toru ngā momo hapa e kitea whānuitia ana:
- Te urupare puhoi i te pēhanga itiKāore e ranea te kaha kume a te rūma iti rawa (hei tauira, he 9×6 i runga i te toki taraiwa 13-tana) i te pēhanga paerewa 6.5 pae, ka roa ake te tawhiti mutu.
- Te kaha nui me te tere o te kakahuKa utaina rawatia ngā pū whakahāngai whakarerekē ngoikore, ngā pū S-cam me te arai parai e tētahi rūma nui rawa (hei tauira, he 30×30 i runga i te toki muri o te wakatō māmā).
- Te rahunga tuku taha-puna. Kāore pea te rūma kore e ōrite i te pito whiu-teitei (hei tauira, he T30/30DDS whiu-76mm i runga i te pērai haere-48mm) e tuku katoa i te pērai tū i te pēhanga tuku-hau o te pūnaha. Ko teCVSAE kī ana ngā kaupapa tirotiro i te whakamahi hapa o te pēki waka hei takahi auau i te tikanga o te whakamahi.
Ka taea te karo i ngā momo rahunga e toru mā te whakahaere i te rere o ngā taahiraa-toru i mua i te whakatakoto i te ota o te rūma. Ko te tau putumōhio te putanga o te rere, ehara i te tāuru.
Ripanga Tohutoro Mahere Whiu Rūma Pērai (9×6 ki te 30×30)
Ka whakakotahi te ripanga tohutoro i te Hipanga 1 me te Hipanga 2 ki roto i te rapunga kotahi. Ko terārangi katoae kapi ana i ētahi atu momo (T2424UD, T2430DDLS, T3024, T3030DCP, T3034DCP, T16LCW, T20LCW) mō ngā āputa rohe.
| Mai i (Waka) | Ki (Te Rūma) | Whiu | Ara Putumōhio |
|---|---|---|---|
| Toki muri o te wakatō māmā | T9 HF | 44mm | 9×6 / 2-M16x1.5 / tokotoko pana 93-123mm |
| Toki mua o te taraka waenga-waenga | T12/6200 | 48mm | 12×12 / M16x1.5 / tokotoko pana 117-124mm |
| Toki mua o te tarakihana taumaha-waenga | T18/24 | 64mm | 18×24 / 2-3/8 inihi NPT / tokotoko pana 15.5mm |
| Toki tohu tarakihana taumaha-waenga | T20 | 57mm | 20×20 / maha-awa / tokotoko pana 200-260mm |
| Toki taraiwa tarakihana taumaha | T30/30DD | 64mm | 30×30 / 3/8 inihi NPT / roa 100-125mm |
| Toki taraiwa tarakihana taumaha (whiu roa) | T30/30DDS | 64mm / 76mm | 30×30 / M16x1.5, 3/8 inihi rānei NPT / tokotoko pana 285-340mm |
Ngā Pātai Auau
He aha te tikanga o te awhe whiu 9×6 ki te 30×30 i runga i te rūma pēki puna?
Ko te tohu tau-rua e pā ana ki te horahanga o te diaphragm whai hua i roto i ngā inihi tapawhā mō te taha ratonga me te taha puna. Ko te rūma 9×6 (T9 HF, 44mm whiu) he kaiwhakaoho tereira-māmā; ko te rūma 30×30 (T30/30DD, 64mm whiu; T30/30DDS rānei, 64/76mm whiu) he kaiwhakaoho toki taraiwa-tarakihana-taumaha. Mā te whakarea rua i te horahanga ka tata ki te whakarea rua i te putanga kaha ratonga mō te pēhanga tuku ōrite.
He aha e kore ai e taea e au te whiriwhiri i te rūma nui rawa (30×30) mō ia toki?
E toru ngā raruraru āpure ka puta mai i te rahinga nui o te rūma. Tuatahi, ka puhoi te wā urupare nā te mea ka roa ake te whakakī o te rōrahi diaphragm nui ake i te tere rere o te hau. Tuarua, ka nui rawa te kaha o te tokotoko pana i te whakatikatika mangere, ka tere ake te pakaru o ngā pūkaha S-cam. Tuatoru, ka piki ake te pēhanga tuku taha-puna, ka ārai i te tukunga katoa o te pēki tūnga. Ka ōrite te rūma matau ki te taumaha o te toki me te āhua o te pēki.
He aha te pānga o te kōwhiringa miro tauranga (M16x1.5 vs 3/8 inihi NPT vs M22x1.5) ki te kōwhiringa rūma?
He pātai mō te whakaurunga o te waka, ehara i te pātai mō te mahi. Ko ngā taraka Pākehā e whakamahi ana i ngā awa ine M16x1.5, M22x1.5 rānei. Ko ngā taraka o Amerika Te Raki e whakamahi ana i te 3/8 inihi NPT. E whakaatu ana te T20 i te miro awa M16x1.5 / M22x1.5 / 3/8 inihi NPT / 2-M22x1.5 / 2-3/8 inihi NPT, ā, e whakaatu ana te T30/30DDS i te miro awa M16x1.5 / 3/8 inihi NPT. Ka puta he mōrearea turuturu i ngā urutau i runga i te ara iahiko parai-ratonga e kore e whakaaetia e tetahi kaiwhakahaere waka.
He aha te roa o te whiu (mm) e tika ana mō ia rahi o te rūma?
Ka taurite te roa o te whiu me te rahi o te rūma engari ehara i te mahi tika o te tohu tau-rua. Ngā uara whiu kua tuhia mai i te putumōhio: Ko te T9 HF he 44mm; ko te T12/6200 he 48mm; ko te T18/24 he 64mm; ko te T20 he 57mm; ko te T30/30DD he 64mm; ka tukuna e te T30/30DDS he whiu 64mm, 76mm rānei. He maumau te haere o te whiu 76mm i runga i te pēraki haere-64mm; kāore e taea e te whiu 44mm i runga i te pēraki haere-64mm te tae ki te rohe miihini o te puranga pēraki.
He aha te rerekētanga i waenga i te T30/30DD me te T30/30DDS?
He rūma 30×30 ngā mea e rua, i hangaia mō ngā toki taraiwa tarakihana taumaha, engari he rerekē te roa o te whiu e arohia ana. Ko te T30/30DD e whakaatu ana i te whiu 64mm, te putanga 3/8 inihi NPT, te roa 100/115/125mm. Ko te T30/30DDS e whakaatu ana i te whiu 64mm, 76mm rānei, te putanga M16x1.5 / 3/8 inihi NPT, te roa o te tokotoko pana 330/285/340mm. Ko te T30/30DDS te momo whiu roa mō ngā taraka he nui ake te haere S-cam, mō ngā caliper kōpae-pēki rānei e hiahia ana ki te neke piston raina ake.
Āhea te roa o te tokotoko pana (mm) ka noho hei paearu whiriwhiri?
Ko te roa o te tokotoko pana ka noho hei paearu whiriwhiri i te wāhanga tāutanga, ehara i te wāhanga rarangi. Ka tuhia e ngā rūma rerekē ngā awhe roa rerekē o te tokotoko pana: T9 HF i te 123/113/93mm; T12/6200 i te 117/124mm; T20 i te 200-260mm; T30/30DDS i te 330/285/340mm. Me tae te tokotoko pana ki te whakatikatika mangere me te painga ā-mīhini tika, me te kore e hinga ki raro i te whiu katoa.
He mea nui te miro pūtu (5/8 inihi UNC vs M16x1.5 vs M48x2) mō te whakakapinga o te rūma?
Ko te miro pūtu te pātai mō te tauira whakairinga, ā, koinei te take tino noa e kore ai e angitu te whakawhiti rūma i te awheawhe. Ko te T9 HF e whakaatu ana i te M48x2, i te 1-3/4 inihi-12UN-2A rānei; ko te T12/6200 e whakaatu ana i te M48x2; ko te T18/24 e whakaatu ana i te 5/8 inihi UNC i te pokapū pūtu 120.7mm. Me ōrite te miro pūtu ki ngā pou whakairinga i runga i te whāriki toki. Ki te hē te miro pūtu, te pokapū pūtu rānei, kāore e taea te whakapiri tinana i te rūma ki te toki.
Whakamutunga
He rite tonu te āhua o te mahere whiu 9×6 ki te 30×30 puta noa i ngā OEM waka arumoni. Ka whakawhāitihia e te Hipanga 1 te rahi o te rūma mā te akomanga waka me te tūranga o te toki. Ka maukati te Hipanga 2 i te whiu mā te whakataurite i te uara whiu kua tuhia o te rūma ki te whakaritenga haere-ā-ringa o te pēra. Ka manatokohia e te Hipanga 3 te putanga kaha me te wā urupare ki ngā raraunga pēra OE me te ECE R13-H.
TeShaoxing Fangjie putumōhio ruuma wahiae whai ana i tēnei rere.NHTSAFMVSS 121 meFMCSAwhakarato i te anga ture: e ono ngā tauira tohutoro — T9 HF, T12/6200, T18/24, T20, T30/30DD me T30/30DDS — e kapi ana i ngā huinga rahi-me-whiu noa, me ngā uara whiu kua tuhia, ngā miro tauranga, ngā miro pūtu me ngā roa o te tokotoko pana e hono tika ana ki ngā rapunga Hipanga 1 me te Hipanga 2.
Ko Elian Zhou te Kaiwhakahaere Kaweake i Shaoxing Fangjie Auto Accessory Co., Ltd. (Shaoxing FanDa Import and Export Co., Ltd.), he kaihanga o ngā rūma pēki puna, ngā whakatikatika whakaroa aunoa, ngā kete whakatika caliper pēki me ngā takirere solenoid ABS mō ngā taraka, ngā wakatō me ngā pahi kei Shaoxing, Zhejiang. Mā Elian e whakarite te pakihi kaweake a te kamupene ki ngā waka rererangi me ngā kiritaki OE o Ūropi, Amerika Te Raki me Amerika Te Tonga, me te 80% o te hanga e kaweake ana me ngā hononga roa i roto i te neke atu i te 100 whenua.
Kamupene: Shaoxing Fangjie Auto Accessory Co., Ltd.
Paetukutuku: https://www.cnfjautoparts.com/
Wā tuku: Akuhata-07-2026